ASTM A182 Standard Specification

ASTM A182 / A182M – 12a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service.

ASTM A182 is a martensitic stainless steel. The additions of Nickel and Molybdenum, which gives it excellent sub zero notch ductility, superior to other standard 13 Cr, 410 and 420 Mod martensitic stainless steels.
UNS S41500 steel is air hardening, with little danger of thick sections cracking during heat treatment.
In addition to limiting the maximum hardness allowed to 23 HRC max, NACE MR0175 imposes heat treatment temperature restrictions.
The weldability and corrosion resistance of ASTM A182 are also excellent, being extensively used in the manufacture of Valve Bodies, Flanges, Seats, Gates, Tubulars, etc.
ASTM A182 specifies a minimum 0.2 PS value of 95 KSI. This NACE approved grade is limited to 75 KSI because of the hardness restriction.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

Chemical Requirements of ASTM A182 material (Composition, %, max)

SymbolCMnPSSiNiCrMo
F3040.0820.0450.0318.0-11.018.0-20.0_
F304L0.0320.0450.0318.0-13.018.0-20.0_
F3160.0820.0450.03110.0-14.016.0-18.02.00-3.00
F316L0.0320.0450.03110.0-15.016.0-18.02.00-3.00
F3210.0820.0450.0319.0-12.017.0-19.0_
Note: composition of Cu, N, V, Co are none or few.

Mechanical Requirements  of ASTM A182 material

Material SymbolTensile Strength
min, MPa		Yield point
min, Mpa		Elongation
min, %		Reduction of area
min, %
ASTM A182 F3045152053050
ASTM A182 F304L4851703050
ASTM A182 F3165152053050
ASTM A182 F316L4851703050
ASTM A182 F3215152053050

Popular posts from this blog

Dimensions of spectacle blinds according to ASME B16.48

Image
Dimensions of spectacle blinds according to  ASME  B16.48 for installation between  ASME B16.5 flanges. Material Symbol C Mn P S Si Ni Cr Mo Cu N V Co ASTM A105 0.35 0.60-1.05 0.035 0.04 0.10-0.35 0.4 0.3 0.12 0.4 _ 0.08 _ ASTM A350 LF2 0.3 0.60-1.35 0.035 0.04 0.15-0.30 0.4 0.3 0.12 0.4 _ 0.08 0.02 ASTM A182 F304 0.08 2 0.045 0.03 1 8.0-11.0 18.0-20.0 _ _ _ _ _ ASTM A182 F304L 0.03 2 0.045 0.03 1 8.0-13.0 18.0-20.0 _ _ _ _ _ ASTM A182 F316 0.08 2 0.045 0.03 1 10.0-14.0 16.0-18.0 2.00-3.00 _ _ _ _ ASTM A182 F316L 0.03 2 0.045 0.03 1 10.0-15.0 16.0-18.0 2.00-3.00 _ _ _ _ ASTM A182 F321 0.08 2 0.045 0.03 1 9.0-12.0 17.0-19.0 _ _ _ _ _ EN 10025 S235JR 0.2 1.4 0.045 0.045 _ _ _ _ _ 0.01 _ _ 20Mn 0.17-0.23 0.70-1.00 0.035 0.035 0.17-0.37 0.3 0.25 0.25 20 0.17-0.23 0.60-1.00 0.03 0.02 0.17-0.37 0.25 0.25 0.25 16Mn 0.13-0.19 1.20-1.60 0.03 0.02 0.20-0.60 0.3 0.3 0.25 Material Symbol Tensile Strength, min, MPa Yield point, min, Mpa Elongation, min, % Reduction of area, min,
Read more

A figure-8 blank

Image
A figure-8 blank (also called a Spectacle Blind Flange) is a pressure-retaining plate with one solid end and one open end connected with a web or tie bar. Specifications: Size: 1/2” to 60”, DN 12mm to DN 1500mm Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250 Facing: RF / RTJ Material:  Cabon steel: A105, A350 LF2 Stainless steel: A182 F304/F304L/F316/F316L/F321 Alloy steel: F11, F12 Packing: plywood case and plywood pallet Keywrods: Spectacle Blind Flanges, Spectacle Blind Flange, Spectacle Flanges, Spectacle Blind Flanges manufactory  Standards, Dimensions & Weight ASME B16.48 Class 150 ASME B16.48 Class 300 ASME B16.48 Class 600 ASME B16.48 Class 900 ASME B16.48 Class 1500 ASME B16.48 Class 2500 Key Features: Can be attached to the pipe without welding (sometimes an additional seal weld is used as well) Ideal for higher pressure and temperature applications for small pipe sizes Not recommended for larger loads, especia
Read more

Flange Types

Image
A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Materials for Flanges ,  Measure the size of a flange Packing the pipe flange Pipe Flanges Raw Material Specifications Applications of flanges Flange Face Surface Finish Pressure Classes of Flanges Flanges Manufacturing Process Flange materials acc. to ASTM Stainless flange ,  Forged flange Below are our available industrial pipe flanges that will meet your project needs. We will help you put together your entire project and ship it to your closest port. We ship globally!  Contact us  to speak with one of our experienced staff, who can help you with your project needs. Blind Flanges >> The blind flange is used to close ends of piping systems. It is a kind of round plate with no center hold but with all the proper bolt holes. Figure-8 Blanks  >> A figure-8 blank (also called
Read more